Sold as a pair. These brackets and pads allow for use of 1 1/2 square aluminum structural extrusions (8020) as roof rails on full sized Transit vans. Works on all roof heights and lengths. Center to center distance between the rails is 57.65" + or - .15". The rails are positioned high enough for a crossbar attached to the inside (not on top) of the rail will clear the center of the roof by 3/8". This provides a much cleaner look from the side. Panels can be mounted at the same elevation as the crossbars and rails with our 2-hole and 3-hole tabs. Please contact us for help designing a solar layout to fit your needs. Then we can supply a complete kit (less panels) for your system.
Brackets come in Black only.
All hardware for attaching the rails to the bracket and bracket to van are included. The rails are not Included nor any other mounting accessories for the rails. There is a drawing in the images above that will allow you to determine how long the rails need to be for your van. Please call or write for assistance.
The pads have 3M VHB peel and stick adhesive on the bottom to seal against van roof surface. Do no exceed maximum roof loading as recommended by vehicle manufacturer.
Explanation of 148 Ext most rear brkt/pad option. The 148WB Extended Van has a pad position at the very back on both sides that takes a special pad and the tall bracket if you choose to go back that far. This pad will be glued on with the window weld after you put all of the other pads, towers and the rail on. This will allow you to line up these very back pads. Do not tighten the bolt until the window weld has dried or it will pull the pad down.
80/20 rails are NOT included. Please see separate listing for 80/20 bars.
If you have questions about this product you can call Hein at 541-49O-5O98