Indel B Plein-Aircon 12V Air Conditioner Adapter for NCV3 & VS30 Sprinter
Indel B Plein-Aircon 12V Air Conditioner Adapter for NCV3 & VS30 Sprinter
Indel B Plein-Aircon 12V Air Conditioner Adapter for NCV3 & VS30 Sprinter
Indel B Plein-Aircon 12V Air Conditioner Adapter for NCV3 & VS30 Sprinter
Indel B Plein-Aircon 12V Air Conditioner Adapter for NCV3 & VS30 Sprinter
Indel B Plein-Aircon 12V Air Conditioner Adapter for NCV3 & VS30 Sprinter

Indel B Plein-Aircon 12V Air Conditioner Adapter for NCV3 & VS30 Sprinter

Regular price $205.59
/

Indel B Plein-Aircon 12V Patent Pending adapter matches the contour of the OEM roof so the air conditioner mounts to a flat surface.  Prevents distorting the roof sheet metal and can be used as an aid for locating the AC. They are CNC machined out of UV and fire resistant expanded PVC.

The measurement is determined by taking a  measurement from the center of the large plug on the rear of the van to the back edge of the hole you will cut. The photo of the plug used is in the main photos. We will also need to know which wheel base you have, 144, 170 Regular or 170 Extended.

This is a new item and we are building our positions. If you don't see the one you want please reach out to Kim with a measurement as described above. 541 49O 4292

AC Adapter Install procedure: We recommend 3m Window-weld adhesive which you can get at Napa. Locate and cut the hole. You can use the adapter as a guide to mark the hole. Stay clear of roof supports, obviously. Make a tape line 1/4" beyond the adapter perimeter. De-gloss the area with a Scotch- brite pad. No need to scuff. Just dull the paint. Clean with isopropyl alcohol and let dry thoroughly. Blow dryer if it's wet and/or cold out. Apply a good amount of the Window-weld on the face of the adapter. Then press the adapter down onto the roof until the adhesive oozes out the sides. It's not necessary to clamp. If you do, use a lot of lightly set clamps and spread out the clamp force over the whole surface area. Using the adhesive that oozes out, make a fillet around the adapter with a double gloved finger. Pull the tape within 15 minutes. Cure is fast on outside. Let cure overnight and then proceed with the AC install per the AC instruction. Seal the adapter and onto the roof about 1/2" with brush on bed-liner or Flexseal from the TV guy works well. Good idea to check the integrity and reapply the sealant every so often. Dicor self leveling sealant also works but looks a little messy.

Watch Hein's youtube video about this product.

If you have questions about this product you can call Hein at 541-49O-5O98



Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.