Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket
Promaster Roof Rail Attachment and L Bracket

Promaster Roof Rail Attachment and L Bracket

Regular price $98.24
/

Patent Pending. Rail attachment kit for Full size Promaster vans. This kit can be used to attach roof rails to the 'nail heads' on top of the van. Each kit comes with 2 stainless steel clips with 5/16-18 threaded studs, 2 CNC machined pads that fit the plate around the posts, 4 stainless steel nuts and 4 stainless steel washers and 2 L Brackets with hardware.

L Brackets only will include the hardware to attach to the 8020 but no Clips and pads.

* Black Anodizing may fade over time due to sun exposure.

8020 bars are not included in this kit.

If you have questions about this product you can call Hein at 541-49O-5O98

We have a number of pre-planned solar layouts that we can share with you.

WARNING!

Failure to follow warnings below may allow rack to come loose from vehicle and cause injury

or death.

1. Do not exceed 20 lbs load on each tower.

2. Do not extend any component more than 4" beyond forward or rearward most towers.

3. Do not exceed total allowable load by vehicle manufacturer.

4. Use all available attachment points on van roof.

5. Do not install roof top deck or climb on rack.

6. Check and tighten all hardware after 100 miles and every 500 miles there-after.

7. Check overall integrity of rack every 500 miles or monthly whichever is more frequent.

 If in doubt, please submit rack plans or photos for evaluation prior to final installation or use.

Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold ?as is? and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.