Arctic Fiber Thermal Insulation for vans is a high-loft 100% non-woven, thermally bonded polyester insulation. The material is 2" thick after it lofts up. One roll of material is 20 feet long x 60" wide. Arctic Fiber Insulation is widely used in Alaska in the Van industry and has other uses in pads, covers on exterior pipe, flange valves and other special equipment.
Benefits of Arctic Fiber Insulation at a Glance:
- Allows Trapped moisture to pass through it without being held in place and drys out quickly.
- Polyester batt insulation will not promote mold growth.
- Lightweight and easily fabricated to desired dimensions with a utility knife or scissors.
- Is not an irritant and will not cause skin irritation.
- Passes the FMVSS302 burn rate test.
We recommend using a high temp adhesive spray to apply Actic Fiber Thermal Insulation to the van skin.
Arctic Fiber Thermal Insulation comes compressed; we recommend unpacking it as soon as it is received. One roll is 20 linear feet. 20ft long by 60 inches wide.
Approximate amounts of Actic Fiber Thermal Insulation needed to insulate the walls, ceiling, doors and cab area in select vans:
- 144 WB Sprinter, 148 WB Ford Transit with slider window & window in back doors = 50 linear feet
- Promaster 159 WB = 60 linear feet
- 170 WB Sprinter = 60 linear feet
- 170 WB Extended Sprinter = 70 linear feet
Please call if you are in Alaska or Hawaii for shipping 541-49O-4292
DISCLAIMER: Owner and/or installer assumes all risks associated with products and/or components purchased from DIYvan. Owner and/or installer recognizes and agrees that this product, and any of its component parts, is sold “as is” and that DIYvan makes no representation or warranty of merchantability that the product is fit for any particular purpose.