Insulation / Noise Control

• Delivers more acoustic absorption per unit weight vs. competitive products
• Helps customers meet mass reduction goals
• Non-woven sound absorbing fibers create a quieter vehicle environment
• Hydrophobic fibers resist moisture, mold and mildew

Add our Thinsulate Installation kit: scissors, 4ft flexible rod and high strength string.  We will ship it inside your roll of Thinsulate.

Recommend using 3M 90 Adhesive Spray to apply the white fiber side to the Van skin.

Approximate amounts needed to insulate the walls, ceiling, doors and cab area:
144 WB Sprinter,148 WB Ford Transit with slider window & window in back doors = 50 linear feet
Promaster 159 WB = 60 linear feet
170 WB Sprinter = 60 linear feet
170 WB Extended Sprinter or Transit 148 Extended = 70 linear feet

Any order over 45 linear feet will ship in two rolls.

Please call if you are in Alaska or Hawaii for shipping 541-49O-4292

Minicell Foam Insulation for Van floors. 2 lb density.  Minicell is fire retardant, UV stable, hydrophobic and offers sound deadening for your application.

• Reflects up to 97% of Radiant Heat, Excellent Vapor Barrier for Multiple Applications
• Easy To Work With, Project and DIY Friendly, Flexible and Durable, Cuts Easily With Razor Knife
• Insect, Bird and Rodent Resistant, Non Toxic and No Itching
• Indoor Air Quality Rated Reflective Insulation and Weatherization Product

Combining 7/32" Closed Cell Foam (not bubble packaging material) and Pure Aluminum Foil (not metalized plastic) The Low-E SSR line of products provides performance and appearance for your Insulation upgrades of choice. Low-E meets the Indoor Air Quality standards set forth by California 01350, is mold and mildew resistant as well as a vapor barrier.

This Low-E is 60" wide, 1 linear foot is 5 square feet.

Low-E is FMVSS 302 certified (federal motor vehicle safety standard).

If you have questions about this product you can call Hein at 541-49O-5O98

• Delivers more acoustic absorption per unit weight vs. competitive products
• Helps customers meet mass reduction goals
• Non-woven sound absorbing fibers create a quieter vehicle environment
• Hydrophobic fibers resist moisture, mold and mildew

• Delivers comparable or better performance to conventional constrained layer damping (CLD) materials and is less than half the weight
• Stand-off layer features low-density engineered stem web that optimizes damping performance
• Damps structure-borne noise when lighter materials such as thin-gauge steel, aluminum and composites are used, without adding significant weight
• Flexible, conformable material applies uniformly to complex shapes
• Adhesive backing improves wet out and won't delaminate even at high temperatures
• Can be installed in vertical or inverted applications
• Meets requirements of many OEMs for low interior VOCs
• Thickness of 2.9 mm allows for a wide range of installations where space is limited

The material comes compressed; we recommend unpacking it as soon as it is received. One roll is 20 linear feet. 20ft long by 60 inches wide. 

Arctic Fiber is a high-loft 100% non-woven, thermally bonded polyester insulation. The material is 2" thick after it lofts up. One roll of material is 20 feet long x 60" wide.  This insulation is widely used in Alaska in the Van industry and has other uses in pads, covers on exterior pipe, flange valves and other special equipment.

• Allows Trapped moisture to pass through it without being held in place and drys out quickly.
• Polyester batt insulation will not promote mold growth.
• Lightweight and easily fabricated to desired dimensions with a utility knife or scissors.
• Is not an irritant and will not cause skin irritation.
• Passes the FMVSS302 burn rate test.

Recommend using a high temp adhesive spray to apply to the van skin.

Approximate amounts needed to insulate the walls, ceiling, doors and cab area:

144 WB Sprinter,148 WB Ford Transit with slider window & window in back doors = 50 linear feet

Promaster 159 WB = 60 linear feet

170 WB Sprinter = 60 linear feet

170 WB Extended Sprinter = 70 linear feet

Please call if you are in Alaska or Hawaii for shipping 541-49O-4292

• Reflects up to 97% of Radiant Heat, Excellent Vapor Barrier for Multiple Applications
• Easy To Work With, Project and DIY Friendly, Flexible and Durable, Cuts Easily With Razor Knife
• Insect, Bird and Rodent Resistant, Non Toxic and No Itching
• Indoor Air Quality Rated Reflective Insulation and Weatherization Product

Combining 7/32" Closed Cell Foam (not bubble packaging material) and Pure Aluminum Foil (not metalized plastic) The Low-E SSR line of products provides performance and appearance for your Insulation upgrades of choice. Low-E meets the Indoor Air Quality standards set forth by California 01350, is mold and mildew resistant as well as a vapor barrier.

This Low-E is 72" wide, 1 linear foot is 6 square feet.

Low-E is FMVSS 302 certified (federal motor vehicle safety standard).

This kit includes: scissors, 4ft flexible rod and high strength string.  Helpful products for installing your Thinsulate.

If you order with a roll of Thinsulate the package will be inside the roll.