Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30
Insert Panel with box for Sprinter NCV3 and VS30

Insert Panel with box for Sprinter NCV3 and VS30

Regular price $182.49
/
Mounting panel with rear mounted box. 3 sizes for first (forward), second (middle) and third(rear) lower wall openings behind driver. The outside surface is flush with the surrounding sheet metal so wall panels can go over. Panel and box sides is expanded PVC. Back panel is .25" thick ABS plastic. Depth of box from face of panel is 2 3/4". Interior dimensions of boxes are as follows

Front box 9021713
inside dimensions
height 16" width 11.5" depth 2.75"
opening size
height 15.25 width 11.25" corner radius 1"

Middle box 9021750
inside dimensions
height 16" width 11.45" depth 2.75"
opening size
height 15.25 width 11.2" corner radius 1"

Rear box 9021755
inside dimensions
height 16" width 9" depth 2.75"
opening size
height 15.25 width 8" corner radius 1"


note: depth is from
front face of panel
which is .75 thick


These are great for mounting electronics such as inverters, fuse panels, solar controllers, DC-to-DC chargers, switches, etc. Holes can be cut or drilled into sides of box for cable/wire routing. Thick back panel holds screws well for mounting components. Plastic construction is non conductive for increased electrical safety. There is room for back lighting with LED strip at top inside of box. Fits behind wall panels.

Please contact Hein at 541 49O 5O98 if you have questions.

We are honored to help you with your van build.