Lemans model 02-220 motorized vent with V12 louvered interior closure 35-2540 from G & C systems in the Netherlands. Low noise 52DB(A) fan is great for vans. 12VDC 7A (80w) at highest speed of 2600rpm creates air flow of 500 ft3/min. Mounting flange is ABS and cowl is PA6 nylon. 9.125" ID hole required in roof. Flange is 12.28" OD.
It is recommended that you completely let the fan stop before reversing the fan. Failure to do so could burn out the motor.
The Lemans fan does tend to produce more noise than a Maxxair Fan.
***Prewired Bezel plate or prewired seperate control plate comes with a speed controller w/ reversing switch. The purchase of the prewired bezel will require a purchase of the LeMans fan with the louvers. We will wire it for you! There is a photo showing what the final product looks like.
Interior closure can be either manually or electrically closed. These vents are different from typical RV vents in that the air closure is on inside. Unique design of fan surround and cowl keeps moisture out. Interior closure is 11.41" diameter and 3/4" thick. We will include a snow filter with the purchase the fan.
These vents do not include a plenum to bridge the gap (space) between inside of roof and top of ceiling panel. AC foam seal can be used to do this.
Weight is 4lbs 7oz.
We produce patent pending mounting adapters to fit contour of van roof. They are not included unless you select it "with adapter". Please make note of van make, year and model in notes at purchase. We will contact you to verify position. We highly recommend using our adapter to mount this vent.
Please call Hein 541 49O 5O98 if you have any questions about this product.
DISCLAIMER: Owner and/or installer assumes all risks associated with products and/or components purchased from DIYvan. Owner and/or installer recognizes and agrees that this product, and any of its component parts, is sold “as is” and that DIYvan makes no representation or warranty of merchantability that the product is fit for any particular purpose.