DIYvan is there for every step of our Do It Yourself Van Conversion with experienced advice and our full Impact Products line including 3M Thinsulate, 80/20 cross bars, solar mounting brackets, storage solutions and roof vent adapters. We are dedicated to helping DIY and professional up-fitters with their van projects. It is our pleasure to share our engineering and fabrication knowledge and experience to help you complete your build and enjoy your van in comfort, safety and efficient style.
Patent Pending. Aluminum plate to replace your maxxair vent fan with a Low Profile Lemans fan. The aluminum plate will go over one of our existing vent adapters if installed on your van or it will fit directly on the roof in the area that was the Sprinter raised circle Bay 2 or our standard Sprinter 144 rear Bay 5 vent position. The plate is unfinished aluminum. The plate can be painted to match the vehicle.
The inside bezel is made of grey expanded pvc.
This will require purchasing the Le Mans Fan. No need to buy the speed controller w/ reversing switch or the Lemans fan with adapters. The Bezels will include the switches.
***Please call or text us for your specific application so we can go over all the items you will need.
We recommend using butyl tape or sikaflex to adhere the aluminum plate to the surface. 16 screws are included. Seal the edge with Dicor or the equivalent.
The outside dimension of the plate is 16.25" x 16.25"
Disclaimer: Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold ?as is? and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Interior Backing Frame for vent installation, Euro size 400mm x 400mm opening
Frame that is used on inside of roof with our patent pending outside vent adapters for a 400mm x 400mm opening. This frame will not work in the rear-most roof panel in the Ford Transit 148WB regular length. We have shorter strips for that application, https://diyvan.com/collections/roof-vent-adapters/products/ford-transit-inside-rear-support-strips-for-148wb-and-130wb
Provides material for screws to engage as they penetrate the roof metal. Made from expanded PVC so will not rot, mold or absorb moisture which is typically found around the vent. 14" x 14" inside opening and 16.75" x 16.75" outside dimensions. Available in two thicknesses. 1/2" and 3/4". 1/2" thickness is more flexible and will bend to fit curvature of roof if needed. 3/4" thickness is more rigid so will need a thicker bead of adhesive to make full contact with interior roof surface. Multiple frames can be stacked to make up difference between skin and head liner. Also see our framing strips if more space between inside of roof and headliner needs to be filled.
These frames are not contoured to the ribs, they are flat. Actual thickness may vary by - 1/8" due to variations in the material.
Instructions for use: bond this frame to the inside of the roof skin with 3M Windoweld(TM), Sikaflex 221, or another equivalent adhesive. Use thick (1/2 - 3/4 inch) bead of adhesive to make up space between inside of roof and frame so it is level on the bottom Let cure and then install vent. Can be used to help clamp our vent adapters to outside and then later installed on inside as backing frame.
Interior Backing frame is not to be used together with the framing strips that we offer on other listings.
Construction and method of assembly is patent pending.
If you have questions about this product you can call Hein at 541-49O-5O98
Low profile Starlink entry puck. VHB mounted base and matching cap plate. Comes with rubber grommet to protect wires from edge of hole cut into roof, 4 self drilling screws and sealant for around wires and between base and cap.
Puck is 2 1/4 inch x 2 1/4 inch. Drill hole is 1", wire hole is .375 OD
Locate and drill hole in van roof. Prime edge of hole and install grommet. Peel backing off VHB and center base over hole. Apply sealant in wire troughs and on top of wires and on face of base. Place cap on top of base and secure with screws. Drilling 1/16 diameter pilot holes in roof for screws is recommended. Wipe off excess sealant. Cover with Dicor or equivalent if desired. Not required.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold "as is" and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Vent delete plate. If you have decided to remove your vent fan use our aluminum plate for covering the 14" x 14" hole. Plates are unfinished aluminum. The plate can be painted to match the vehicle. This can also be used right on top of our vent adapter if you installed the fan with our patent pending adapter.
If your hole is in an area where there are ridges this will not work unless it is going on top of our vent adapter.
We recommend using butyl tape or sikaflex to adhere it to the surface. 16 screws are included. Seal the edge with Dicor or the equivalent.
The outside dimension of the plate is 16.25" x 16.25"
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold ?as is? and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Cover plate kit for placing Marinco ParkPower 15 or 20A shore power inlet into single gang PVC outlet box like Cantex 5133463. Mounting screws included.
WARNING: Improperly installed or wired shore power system can be an electrocution hazard which can cause serious injury or death. Get assistance from a qualified electrician if unfamiliar with these systems.
If you have questions about this product you can call Hein at 541-49O-5O98
DISCLAIMER:
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold "as is" and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Patent pending adapter matches the contour of the OEM roof so an Artic Tern Spoiler mounts to a flat surface. The adapter is 37" long x 4" wide. Prevents distorting the roof sheet metal or spoiler. The Adapters are CNC machined out of UV and fire resistant expanded PVC. Use Sikaflex 221 or 3m window weld to adhere it to the roof. We recommend that you seal the adapter after it is installed with a membrane sealant such as Dicor.
Artic Tern Spoiler is not included. We may reach out for additional information about the positioning of the adapter.
DISCLAIMER: Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Please let us know which battery you are using by leaving a message on your order.
Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold "as is" and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
This electric fan from G&C ensures a healthy discharge of air in your automobile. This roof fan only extracts! The roof fan is made of ABS. The voltage is 12 Volts and the consumption is 3 Watts. The noise level is 32 DB. The airflow is 65 M³/H. The fan comes standard with an interior grill, shutter and saw template.
By using the 2-way switch you can turn this fan on and off, not included.
The opening in the roof is 80 mm. Construction height is 64 mm. The fan is available in black.
Specifications: * material: high quality ABS * Function: extract air * Opening in roof: 80 mm * Construction height: 64 mm * air displacement: 65 M³ per hour
Some scratching may occur on the top of the cover due to shipping.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold ?as is? and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Patent Pending, rear door prop holds rear door open using existing latch. Enhances air flow and maintains some level of security using existing door lock. Handy bottle opener is an added feature!
Compatibility:
Sprinter T1N 1994 - 2006
When using this accessory please do not slam your door shut.
DO NOT USE WITH ENGINE RUNNING DUE TO RISK OF EXHAUST GASES ENTERING THE VEHICLE.