Arctic Fiber Thermal Insulation
Arctic Fiber Thermal Insulation
Arctic Fiber Thermal Insulation
Arctic Fiber Thermal Insulation
Arctic Fiber Thermal Insulation

Arctic Fiber Thermal Insulation

Regular price$188.00
/
Shipping calculated at checkout.

Size

The material comes compressed; we recommend unpacking it as soon as it is received. One roll is 20 linear feet. 20ft long by 60 inches wide. 

Arctic Fiber is a high-loft 100% non-woven, thermally bonded polyester insulation. The material is 2" thick after it lofts up. One roll of material is 20 feet long x 60" wide.  This insulation is widely used in Alaska in the Van industry and has other uses in pads, covers on exterior pipe, flange valves and other special equipment.

  • Allows Trapped moisture to pass through it without being held in place and drys out quickly.
  • Polyester batt insulation will not promote mold growth.
  • Lightweight and easily fabricated to desired dimensions with a utility knife or scissors.
  • Is not an irritant and will not cause skin irritation.
  • Passes the FMVSS302 burn rate test.

Recommend using a high temp adhesive spray to apply to the van skin.

Approximate amounts needed to insulate the walls, ceiling, doors and cab area:

144 WB Sprinter,148 WB Ford Transit with slider window & window in back doors = 50 linear feet

Promaster 159 WB = 60 linear feet

170 WB Sprinter = 60 linear feet

170 WB Extended Sprinter = 70 linear feet

 

Please call if you are in Alaska or Hawaii for shipping 541-49O-4292