These are pre-wired fully assembled breaker boxes for use with shore power systems typically used in vans. Features a 15, 20 or 30A Bluesea A-series 2-pole breaker with power on and reverse polarity LED indicators. Front panel is ABS plastic and box is standard PVC electrical box. Connections to breaker are made with double crimped Ancor terminals. 10ft of 3 conductor stranded SO cord extends from line and load sides for easy wiring into system. Line side should be as short as possible. Connect shore power plug or receptacle to LINE end and AC load panel, transfer switch, inverter, or inverter/charger to LOAD end. Each unit is function tested before shipment. Recommend that SO cord be routed inside conduit or split loom (not included) for added protection. Use edge guard or grommets to protect cord from sharp edges.
Use formula of Watts (max load) divided by Volts to determine Amperage required. Example: 1500W/120V=12.5A (use 15A breaker)
WARNING: Improperly installed or wired shore power system can be an electrocution hazard which can cause serious injury or death. Get assistance from a qualified electrician if unfamiliar with these systems.
If you have questions about this product you can call Hein at 541-49O-5O98