as a pair. These brackets allow for use of 1 1/2 square
aluminum structural extrusions (8020 1503-LS recommended) as roof rails on full sized Transit vans. Unistrut (non slotted aluminum recommended) and aluminum angle stock (1 1/2 or 2" x 3/16 thick recommended) can also be used. Compatible with all roof heights and van lengths. Center to center
distance between the rails is 58.5". Cross bars between 8020 rails are 57" The rails are
positioned high enough for a crossbar attached to the inside (not on
top) of the rail will clear the center of the roof by 3/8". This
provides a much cleaner look from the side. Panels can be mounted at the
same elevation as the crossbars and rails with our 2-hole and 3-hole
tabs. There are many other options and possibilities for custom rack designs. Please contact us for help designing a solar layout to fit your
needs. Then we can supply a complete kit (less panels) for your system.
Finish is black or clear hard anodizing.
hardware for attaching the rails to the bracket and bracket to van are
included. The rails are not Included nor any other mounting accessories
for the rails. There is a drawing in the images above that will allow
you to determine how long the rails need to be for your van. Please call
or write for assistance.
Do no exceed maximum roof loading as recommended by
Notes for special 6th Tower for Extended van: The OEM tower location on an extended van is quite far forward from the back of the van. This causes a long cantilever if the roof rails are extended towards the rear. This
special kit includes a CNC'd pad that is bonded to the roof using 3M Windoweld, 5200 (or equivalent) in the area with two diagonal holes in the roof. A special tower is then placed on top of the pad and through bolted using one of the holes with larger washer and nut on inside.
80/20 rails are NOT included. Please see separate listing for 80/20 bars or rail kit including brackets, towers and rails.
If you have questions about this product you can call Hein at 541-49O-5O98