Promaster Roof Attachments, Clips and Pads
Promaster Roof Attachments, Clips and Pads
Promaster Roof Attachments, Clips and Pads
Promaster Roof Attachments, Clips and Pads
Promaster Roof Attachments, Clips and Pads
Promaster Roof Attachments, Clips and Pads

Promaster Roof Attachments, Clips and Pads

Regular price $40.00
/

Patent Pending. Clip and pad attachment kit for Full size Promaster vans. This kit can be used to attach roof rails, our 8020 towers to the 'nail heads' on top of the van. Each kit comes with 2 stainless steel clips with 5/16-18 threaded studs (3" spacing), 2 CNC machined pads that fit the plate around the posts, 4 stainless steel nuts and 4 stainless steel washers.

We highly recommend solid aluminum strut channel rather than steel slotted. It's lighter and easier to paint then plated steel. Drill 3/8
diameter holes in the correct locations to match up to the positions of the clips on the van. If using slotted channel it is possible that you will need to enlarge the slots in the strut just a to make them fit.

20 ft solid 1.625 square aluminum strut from Fastenal 48582
10 ft solid 1.625 square aluminum strut from Fastenal 48574
10 ft solid 1.625 square aluminum strut on McMaster Carr 3230T27

This listing is only for the attachment, no tower brackets.

The Attachments with our Tower Brackets can be found here: https://www.ebay.com/itm/133057484719
8020 1517LS 52.5" long rounded crossbars can be found here: https://www.ebay.com/itm/132966921356
8020 1502LS 52.5" long square crossbars can be found here: https://www.ebay.com/itm/132871157220

If you have questions about this product you can call Hein at 541-49O-5O98. We have a number of pre-planned solar layouts that we can share with you. Please send a text to Hein with photo showing location of your vent(s) and desired amount of solar wattage.

WARNING!

Failure to follow warnings below may allow rack to come loose from vehicle and cause injury or death.

  1. Do not exceed 20 lbs load on each tower.
  2. Do not extend any component more than 4" beyond forward or rearward most towers.
  3. Do not exceed total allowable load by vehicle manufacturer.
  4. Use all available attachment points on van roof.
  5. Do not install roof top deck or climb on rack.
  6. Check and tighten all hardware after 100 miles and every 500 miles there-after.
  7. Check overall integrity of rack every 500 miles or monthly whichever is more frequent.

If in doubt, please submit rack plans or photos for evaluation prior to final installation or use.

Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.