Newest Products
DISCLAIMER
Failure to follow warnings below may allow rack to come loose from vehicle and cause injury
or death.
1. Do not exceed total allowable load by vehicle manufacturer.
2. Use all available attachment points on van roof.
3. Do not install roof top deck or climb on rack.
4. Check and tighten all hardware after 100 miles and every 500 miles there-after.
5. Check overall integrity of rack every 500 miles or monthly whichever is more frequent.
If in doubt, please submit rack plans or photos for evaluation prior to final installation or use.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold as is and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Failure to follow warnings below may allow rack to come loose from vehicle and cause injury
or death.
1. Do not exceed total allowable load by vehicle manufacturer.
2. Use all available attachment points on van roof.
3. Do not install roof top deck or climb on rack.
4. Check and tighten all hardware after 100 miles and every 500 miles there-after.
5. Check overall integrity of rack every 500 miles or monthly whichever is more frequent.
If in doubt, please submit rack plans or photos for evaluation prior to final installation or use.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold as is and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Disclaimer: Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold ?as is? and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold ?as is? and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
If you have questions about this product you can call Hein at 541-49O-5O98
DISCLAIMER:
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold "as is" and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
If you have questions please call, 541-49O-5O98
DISCLAIMER: Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold "as is" and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
When using this accessory please do not slam your door shut.
DO NOT USE WITH ENGINE RUNNING DUE TO RISK OF EXHAUST GASES ENTERING THE VEHICLE.
Set of 2 aluminum reinforcement strips to do one side of two beams or both sides of a single beam. Adds additional strength to the beams when installing an Air Conditioner on a Transit van. Especially important in 2 forward most bays which have the greatest span between beams. For best structural strength order two sets and do both sides of each beam.
The surface of the beams will need to be de-glossed with a scotch-brite pad to improve adhesion. Self drilling stainless screws are included. An option with 1 cartridge of Sikaflex 221 is also available.
-
Dual input: MPPT Solar input or Alternator/Battery input.
- Multi-stage charging ensures batteries are charged to battery manufacturer's recommendations.
- Microprocessor controlled charging algorithm (Bulk, Absorption, Float) for Gel, Flooded, AGM and Lithium batteries.
- Solar Input to trickle charge Alternator Input battery.
-
MPPT solar regulator provides maximum power from solar panels to battery.
Length: 14.0”, Width: 8.1“, Height: 3.8” (356mm x 205mm x 97mm)
Weight: 7.1 lbs. / 3.23 Kg
One piece composite flooring. We offer the floor with or without the machined Minicell.
Composite is .44" thick and minicell is .75" thick.
FOR PICKUP ONLY! If you want us to install the floor there will be an installation fee of $180.00
Text Hein at 541-490-5098 for details, estimated time and pick up.
One piece composite flooring. We offer the floor with or without the machined Minicell. We will need to know if you have a dually or not.
We also have an option to add our step well storage. The floor will be machined over the top of them. If you would like us to install the floor and the step well there will be a labor cost of $270.00 due at time of pick up. This can take 1 to 2 hours.
Composite is .44" thick and minicell is .75" thick.
FOR PICKUP ONLY!
Text Hein at 541-490-5098 for details, estimated time and pick up.
One piece composite flooring. We offer the floor with or without the machined Minicell.
We also have an option to add our step well storage. Both options will be black with black covers. The floor will be machined over the top of them. If you would like us to install the floor and the step well there will be a labor cost of $270.00 due at time of pick up. This can take 1 to 2 hours.
Composite is .44" thick and minicell is .75" thick.
We can also make a floor for the 170 regular and 170 extended "dually". Please leave us a note when ordering.
FOR PICKUP ONLY!
Text Hein at 541-490-5098 for details, estimated time and pick up.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold ?as is? and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold ?as is? and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Patent Pending. Interior Framing Support System.
Adds support when installing the RTX AC unit with one of our Patent Pending RTX Adapters for the Promaster. They are made of Expanded PVC material. Much easier to work with than wood.
If you are ordering these for the Promaster Extended van, please leave us a note.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold ?as is? and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
- High cycle Lithium-Ion (LiFePO4) battery with built in BMS. Intended and designed to fit into existing lead acid Group 27 batteries scenarios while operating in the extreme environments of today. Key component of the Xantrex FREEDOM eGEN System.
- On board LEDs. On the side of the battery for a quick glance of state of charge % as well as quick error fault confirmation.
- High Temperature Rating. Capable of being charged up to 55°C/131°F allows extreme environment recharge without damage to the battery.
- Bluetooth - connect to the Xantrex mobile app to view status of battery
DISCLAIMER
Failure to follow warnings below may allow rack to come loose from vehicle and cause injury
or death.
1. Do not exceed total allowable load by vehicle manufacturer.
2. Use all available attachment points on van roof.
3. Do not install roof top deck or climb on rack.
4. Check and tighten all hardware after 100 miles and every 500 miles there-after.
5. Check overall integrity of rack every 500 miles or monthly whichever is more frequent.
If in doubt, please submit rack plans or photos for evaluation prior to final installation or use.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold as is and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Sold as a pair, these adapters are for upgrading the speakers in the the front doors of 2015 to present Ford Transit vans. The factory door panel and speaker grill is retained for a stealth factory look. This is a crucial step to enjoying better sound quality in your van.
The adapters were designed in 3D CAD and they are machined on a CNC router. The holes in the adapter are perfectly located and countersunk to mount over the factory posts and be secured with the original screws. Then you drill holes in the adapter ring for your speakers and secure them with sheet metal screws. We highly recommend installing 3M Thinsulate(TM) behind the door panel at the same time.
Material for the adapters is 3/4 thick expanded PVC. It won't absorb moisture like MDF or wood and holds screws well without splitting. O.D. is 6.5" (165mm). Thickness is 3/4" (19mm). There are 3 ID sizes to accommodate the cutout diameter needed for the speaker. Please continue reading to learn more about speaker sizing...
While shopping for speakers look for 6 1/2 or 6 3/4 speakers. COAX are the best bang for your buck and component speakers are potentially the best sound but involve replacing the dash tweeters and installing a crossover. Most 6 1/2" speakers require a 5" ID cut out diameter which is the size of hole the speaker will drop into. The corresponds to one of our spacers on the drop down list.
There are also what the industry calls 6 3/4" speakers which allows for a bigger cone and improved base response. These speakers require the 5.62 or 5.75 ID cutout diameter (hole). We have 5.62 and 5.75 ID adapters for these speakers. Do not choose speakers with thick cast aluminum or plastic frames with protruding terminals. These are too large to fit into the smaller hole in the door sheetmetal. It is best to choose a speaker with a thinner formed metal frames and terminals that can be bent slightly should they interfere. Also do not choose a speaker that has a thick frame above the mounting face. This will interfere with the door panel. Overall height of the spacer and speaker should not exceed 1". The door panel can be trimmed to clear a taller speaker. Please contact us if you need help choosing or verifying the fit of a particular speaker.
Here are some specific suggestions of speakers that should fit.
Rockford Fosgate Prime R1675x2, these would take the 5.75ID size,
JBL GT7-6, these would take the 5.625 ID size.
When connecting the factory wires the negative is striped.
Custom sizes are available. Please send the cut out diameter or ID in inches or millimeters.
We are adding an option to include 4 linear feet of SM400L Thinsulate (tm) for the driver and passenger doors.
If you have questions about this product you can call Hein at 541-490-5098