Sprinter Products
Free shipping on most products in the US. DIYvan is there for every step of our Do It Yourself Sprinter Van Conversion with experienced advice and our full Impact Products line including 3M Thinsulate, 80/20 cross bars, solar mounting brackets, storage solutions and roof vent adapters. We are dedicated to helping DIY and professional up-fitters with their van projects. It is our pleasure to share our engineering and fabrication knowledge and experience to help you complete your build and enjoy your van in comfort, safety and efficient style.




DO NOT USE WITH ENGINE RUNNING DUE TO RISK OF EXHAUST GASES ENTERING THE VEHICLE.
One pair. Pads with inserts and hardware only, this does not include the Thule Bracket.
Peel and stick plate for attaching Thule leg bracket to side of vehicle. These ABS plates have 3M VHB tape for attaching to vehicle and 2 brass threaded inserts for attaching Thule leg brackets. Eliminates the need to drill holes in the vehicle. ABS plastic plates can be heated with a heat gun to conform to modestly curved surfaces. Locate and mark, Gently heat for 2-3 minutes from top until plastic becomes a little soft. Remove VHB backing and gently press against side of vehicle. Be sure of placement as VHB sticks on contact and can not be easily removed. Allow 24 hours cure before using leg bracket.
Disclaimer
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold "as is" and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.




The Crew Seat fillers require a 3/8 wide rabbet cut around each hole using a router. There may not be sufficient clearance to do this with the floor in the van. Removal of the floor may be necessary.
Sold by the each, 1 = 1






Patent pending adapter matches the contour of the OEM roof so a Midi Heki Roof Light mounts to a flat surface. Perimeter of adapter matches vent cover for best performance and appearance. Prevents distorting the roof sheet metal or vent flange. Can be used as an aid for locating the fan. Adapters are CNC machined out of UV and fire resistant expanded PVC. The vent mounts to the outside adapter. The outside adapter will fit anywhere along the center cargo area of the roof. We recommend 3M Window-weld or Sikaflex 221 adhesive for adhering the adapter to the roof. Additionally , we recommend that you seal the adapter and roof light after it is installed with a membrane sealant such as Dicor.
Fits a cut out dimension of 500mm x 700mm.
Midi Heki Roof Light is not included.
Photo shown is on a Promaster.
When purchasing an adapter for a Sprinter Van please include a note indicating where you want to place the vent so we can produce the appropriate geometry to match the roof in that location. We will need to know the exact placement of the Skylight. We will need a measurement from the CENTER of the small plug in the rear of the van to the back edge of the opening that you will cut. We also need to know if your van is a 144WB, 170 WB or 170 Extended wheel base. You are also welcome to send a photo to 541 49O 5O98. Please include your name if sending photo. Standard locations for Sprinter vans can be found in the drop down list for this item https://www.ebay.com/itm/132298140143
If you have questions please call Hein 541 49O 5O98
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose




Patent Pending. These brackets are designed for NCV3 and VS30 Sprinter high roof vans with OEM roof rails 51.875" apart. Panels around 52" are recommended. For example Newpowa 180 watt panels.
Please note: These brackets were initially made for the Renogy 175 Watt panel but Renogy has shortened the panel to 49.7". These brackets will NOT work with this panel.
Please contact us for help with your specific application if needed. Two tower brackets and all hardware are included with each kit. 2 kits are required for one panel. One additional kit is needed for attaching each subsequent panels forming one large array of multiple panels.
The brackets are mounted to the underside of the panel with 1/4-20 stainless button head cap screws (included).
DISCLAIMER:
Failure to follow warnings below may allow rack to come loose from vehicle and cause injury or death.
1. Do not exceed 20 lbs load on each tower.
2. Do not extend any component more than 4" beyond forward or rearward most towers.
3. Do not exceed total allowable load by vehicle manufacturer.
4. Use all available attachment points on van roof.
5. Do not install roof top deck or climb on rack.
6. Check and tighten all hardware after 100 miles and every 500 miles there-after.
7. Check overall integrity of rack every 500 miles or monthly whichever is more frequent.
If in doubt, please submit rack plans or photos for evaluation prior to final installation or use.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.













Please contact Hein 541 49O 5O98 if you have questions about this product.





The material comes compressed; we recommend unpacking it as soon as it is received. One roll is 20 linear feet. 20ft long by 60 inches wide.
Arctic Fiber is a high-loft 100% non-woven, thermally bonded polyester insulation. The material is 2" thick after it lofts up. One roll of material is 20 feet long x 60" wide. This insulation is widely used in Alaska in the Van industry and has other uses in pads, covers on exterior pipe, flange valves and other special equipment.
- Allows Trapped moisture to pass through it without being held in place and drys out quickly.
- Polyester batt insulation will not promote mold growth.
- Lightweight and easily fabricated to desired dimensions with a utility knife or scissors.
- Is not an irritant and will not cause skin irritation.
- Passes the FMVSS302 burn rate test.
Recommend using a high temp adhesive spray to apply to the van skin.
Approximate amounts needed to insulate the walls, ceiling, doors and cab area:
144 WB Sprinter,148 WB Ford Transit with slider window & window in back doors = 50 linear feet
Promaster 159 WB = 60 linear feet
170 WB Sprinter = 60 linear feet
170 WB Extended Sprinter = 70 linear feet
Please call if you are in Alaska or Hawaii for shipping 541-49O-4292



Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.










Under vehicle battery box for Sprinter NCV3 2500 and 3500, 144WB and 170WB. Spacious heavy duty formed steel box for single or multiple batteries. Battery box includes 2 battery hold downs and hardware as shown in pictures.
These fit under the chassis on the drivers side next to the fuel tank.
If you have a stock rear heater in the passenger van this box will not fit.
BATTERY BOXES are Powder Coated!
Batteries not included.
If you have questions about this product you can call Hein at 541-49O-5O98
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.





Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.








Sold as each. This is the length you will need to install with our 8020 Sprinter tower brackets, Sprinter High Roof.
See our Sprinter tower brackets and our Tabs to connect solar panels to 8020.
Please contact Hein if you need help with your layout. 541-490-5098
Some scratching may occur in shipping.







Please contact Hein at 541 49O 5O98 if you have questions.
We are honored to help you with your van build.





Sold as a pair, these adapters are for upgrading the speakers in the the front doors of 2007 to 2018 NCV3 Sprinter vans. The factory door panel and speaker grill is retained for a stealth factory look. This is a crucial step to enjoying better sound quality in your van.
The adapters were designed in 3D CAD and they are machined on a CNC router. The holes in the adapter are perfectly located and countersunk to mount over the factory posts and be secured with the original screws. Then you drill holes in the adapter ring for your speakers and secure them with sheet metal screws. We highly recommend installing 3M Thinsulate(TM) behind the door panel at the same time.
Material for the adapters is 3/4 thick expanded PVC. It won't absorb moisture like MDF or wood and holds screws well without splitting. O.D. is 6.5" (165mm). Thickness is 3/4" (19mm). There are many ID sizes to accommodate the cutout diameter needed for the speaker. Please continue reading to learn more about speaker sizing...
While shopping for speakers look for 6 1/2 or 6 3/4 speakers. COAX are the best bang for your buck and component speakers are potentially the best sound but involve replacing the dash tweeters and installing a crossover. Most 6 1/2" speakers require a 5" ID cut out diameter which is the size of hole the speaker will drop into. The corresponds to one of our spacers on the drop down list.
There are also what the industry calls 6 3/4" speakers which allows for a bigger cone and improved base response. These speakers require the 5.62 or 5.75 ID cutout diameter (hole). We have 5.62 and 5.75 ID adapters for these speakers. Do not choose speakers with thick cast aluminum or plastic frames with protruding terminals. These are too large to fit into the smaller hole in the door sheetmetal. It is best to choose a speaker with a thinner formed metal frames and terminals that can be bent slightly should they interfere. Also do not choose a speaker that has a thick frame above the mounting face. This will interfere with the door panel. Overall height of the spacer and speaker should not exceed 1". The door panel can be trimmed to clear a taller speaker. Please contact us if you need help choosing or verifying the fit of a particular speaker.
Here are some specific suggestions of speakers that should fit.
Rockford Fosgate Prime R1675x2, these would take the 5.75ID size,
JBL GT7-6, these would take the 5.625 ID size. If you choose the component version you may have to modify the adapters.
Sprinter door speaker wire color code:
Left Front Speaker Positive Wire (+): Brown/Violet
Left Front Speaker Negative Wire (-): Brown/Dark Green
Right Front Speaker Positive Wire (+): Brown/Orange
Right Front Speaker Negative Wire (-): Brown/Dark Blue
Custom sizes are available. Please send the cut out diameter or ID in inches or millimeters.
We are adding an option to include 3 linear feet of Thinsulate (tm) for the driver and passenger doors.

























These panels fit in the upper part of the door on all 2007 to present highroof Sprinter vans. They are available in fine textured white, black, or grey Celtec which is a durable PVC based plastic composite board. Thickness is ~1/4" (6mm).
The panels mount to the door with black plastic automotive style push pins included. No tools are required. The pins are very secure and won't allow the panel to come out or rattle. We have a variety of speaker sizes available for this rear door panel. Our sizes equal the cut out dimension of the speaker.
You can call or message us if you need help determining the size.
Left is driver side.


Dometic Heki Midi Roof Light. Color of frame and inside shade is off white.
Large Acrylic double-glazed dome light, tinted in grey, can be opened up for ventilation to 45 degree maximum when the vehicle is stationary. Retractable fly screen. Retractable blackout blind. White exterior frame, cream colored inner frame. Manufacture warranty is 1 year.
Specifications:
Assembly on the Roof 24.3" x 33.8"
Cut-out 19.7" x 27.6" (500mm x 700mm)
Weight 17.6 lbs
Operation is Manual Lever
I stock few replacement windows. It is only the plastic tinted cover, Not the inside framing or arms. Part number BG4493, please call to check availability 541 49O 4292.
Disclaimer: Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.



If you have questions please call, 541-490-5098
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold "as is" and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.