Products
If you have questions please call, 541-49O-5O98
DISCLAIMER: Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold "as is" and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Sold as a pair, these adapters are for upgrading the speakers in the the front doors of 2015 to present Ford Transit vans. The factory door panel and speaker grill is retained for a stealth factory look. This is a crucial step to enjoying better sound quality in your van.
The adapters were designed in 3D CAD and they are machined on a CNC router. The holes in the adapter are perfectly located and countersunk to mount over the factory posts and be secured with the original screws. Then you drill holes in the adapter ring for your speakers and secure them with sheet metal screws. We highly recommend installing 3M Thinsulate(TM) behind the door panel at the same time.
Material for the adapters is 3/4 thick expanded PVC. It won't absorb moisture like MDF or wood and holds screws well without splitting. O.D. is 6.5" (165mm). Thickness is 3/4" (19mm). There are 3 ID sizes to accommodate the cutout diameter needed for the speaker. Please continue reading to learn more about speaker sizing...
While shopping for speakers look for 6 1/2 or 6 3/4 speakers. COAX are the best bang for your buck and component speakers are potentially the best sound but involve replacing the dash tweeters and installing a crossover. Most 6 1/2" speakers require a 5" ID cut out diameter which is the size of hole the speaker will drop into. The corresponds to one of our spacers on the drop down list.
There are also what the industry calls 6 3/4" speakers which allows for a bigger cone and improved base response. These speakers require the 5.62 or 5.75 ID cutout diameter (hole). We have 5.62 and 5.75 ID adapters for these speakers. Do not choose speakers with thick cast aluminum or plastic frames with protruding terminals. These are too large to fit into the smaller hole in the door sheetmetal. It is best to choose a speaker with a thinner formed metal frames and terminals that can be bent slightly should they interfere. Also do not choose a speaker that has a thick frame above the mounting face. This will interfere with the door panel. Overall height of the spacer and speaker should not exceed 1". The door panel can be trimmed to clear a taller speaker. Please contact us if you need help choosing or verifying the fit of a particular speaker.
Here are some specific suggestions of speakers that should fit.
Rockford Fosgate Prime R1675x2, these would take the 5.75ID size,
JBL GT7-6, these would take the 5.625 ID size.
When connecting the factory wires the negative is striped.
Custom sizes are available. Please send the cut out diameter or ID in inches or millimeters.
We are adding an option to include 4 linear feet of SM400L Thinsulate (tm) for the driver and passenger doors.
If you have questions about this product you can call Hein at 541-490-5098
The framing strips are expanded PVC and bonded to the interior roof with a thick bead of Windo weld. They are more flexible than wood and plenty strong to support the AC and keep it from jiggling. They are essential if the span between the OEM roof beams is more than 18".
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold ?as is? and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Pair with our Insulated Vent Fan Cover and Maxxfan Deluxe 7500K or 7000K Electric Lid Opening
The framing strips are expanded PVC and bonded to the roof with a thick bead of Windoweld. They are more flexible than wood and plenty strong to support the vent and keep it from jiggling. We double them up when installing roof top air conditioners. They are essential if the span between the OEM roof beams is more than 18". They also provide a backing for the screws that hold up the vent interior bezel. They should be placed 1/4" away from the edge of the hole so the screws for the vent go into the strips. They are a generic size and will need to be cut to length. These strips are not contoured to the van corrugations.
We recommend Sikaflex 221. Locate and cut the 14 x 14 hole. You can use the adapter as a guide to mark the hole. Stay clear of roof support beams.
Make a tape line 1/4" beyond the adapter perimeter.
De-gloss the area with a Scotch-brite pad. No need to scuff, just dull the paint. Clean with isopropyl alcohol and let dry thoroughly. Blow dryer if it's wet and/or cold out.
Apply three 1/8" beads of the Sikaflex on the face of the adapter. Then, press the adapter down onto the roof until the adhesive oozes out the sides. It's not necessary to clamp. If you do, use several lightly set clamps and spread out the clamp force over the whole surface area.
Using the adhesive that oozes out, make a fillet around the adapter with a double gloved finger. Pull the tape within 15 minutes. Cure is fast on outside. Let cure overnight and then proceed with the fan install.
If you purchased our Interior Framing Strips, using the hole that you cut locate where the transverse strips need to be placed on the longitudinal strips. Assemble the interior frame with the 2" screws provided. Once the frame is assembled it will be glued to the interior side of the roof using Sikaflex 221. If the strips ordered are not bay specific, then you may need to cut them to the length of the panel you are installing it in.
We recommend using butyl tape for the fan install. Cover the fan flange with 1" wide tape. Place the flange onto the adapter and press down. Then drill pilot holes through the adapter and into the van roof. You may need the 4 longer screws provided for the corners. Tighten all screws very lightly against the fan flange. Some butyl will ooze out which you can trim off.
Coat the fan flange, adapter and onto the roof about 1/2" with self-leveling Dicor or brush-on Flexseal. Some sealants will melt the fan plastic so you might try it on a portion of the interior bezel first. You will cut a lot of that piece off.
Good idea to check the integrity and reapply the sealant every so often.
**Please note, if you purchased butyl tape with this order and the butyl tape is stuck to the plastic, place it in the freezer for 15 or 20 min. It will release, then let it return to room temperature.
The option with butyl tape includes 64" of butyl tape.
Disclaimer:
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Shop our Patent Pending AC roof adapters to make the install easier. Sprinter, Transit, Promaster.
Typically ships within 3-4 business days and can take another 5-7 days to arrive via truck freight.
**For LTL Freight deliveries, please inspect the entire package and product before the driver leaves. If you find damage, take pictures and make sure the driver notes the damage on the BOL. If damage is found after the driver leaves, we have no recourse with the carrier, and thus, no path to a credit.**
The Plein-Aircon is an innovative rooftop mounted air conditioning system for RVs and vans. This Indel B rooftop-mounted AC features ground-breaking technology, that makes the air conditioning unit convenient, efficient, powerful, and reliable. The Indel B Plein provides 4100 BTU (1200W) of cooling.
With a built-in power supply, you can use the Plein-Aircon even while stopped, without having to idle the engine. Thanks to the Smart Switch built into the power supply, the Plein can be powered by both 12V DC and 115V AC power.
The cutting-edge 12V Samsung compressor works nearly silently, while using as low as 16 Amps per hour. It reliably cools and dehumidifies the air.
This air conditioning unit comes with multiple comfort features, as well. If you want to schedule the AC to turn on in the morning, or before you go to sleep, you can take advantage of the timer, which lets you schedule ON and OFF times down to the minute. Controlling the Plein-Aircon is made easy and intuitive with the included remote control. Set the temperature, blower speed, and fan mode from anywhere in your cabin.
Technical Specifications of the Indel B Plein-Aircon:
Input Voltage |
12V DC (115-230V AC) |
Maximum Power |
4100 BTU (1.2 KW) |
Power Consumption |
16-42 A/h |
Coolant Type |
R134a |
Fan Operating Modes |
3 speeds + auto mode |
Weight |
55.8 lbs (25.3 kg) |
External Dimensions |
9.7 x 26.4 x 31.5 in (246.4 x 670.5 x 800 mm) |
Internal Dimensions |
2 x 21 x 23.6 in (50.8 x 533.4 x 600 mm) |
Roof cut-out Dimensions |
15.8 x 15.8 in (401 x 401 mm) |
Suitable Roof Thickness |
from 1.2 to 2.75 in (30.5-70 mm) |
Disclaimer: Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.
Please contact Hein at 541 49O 5O98 if you have questions.
We are honored to help you with your van build.
Front box 9021713
inside dimensions
height 16" width 11.5" depth 2.75"
opening size
height 15.25 width 11.25" corner radius 1"
Middle box 9021750
inside dimensions
height 16" width 11.45" depth 2.75"
opening size
height 15.25 width 11.2" corner radius 1"
Rear box 9021755
inside dimensions
height 16" width 9" depth 2.75"
opening size
height 15.25 width 8" corner radius 1"
note: depth is from
front face of panel
which is .75 thick
These are great for mounting electronics such as inverters, fuse panels, solar controllers, DC-to-DC chargers, switches, etc. Holes can be cut or drilled into sides of box for cable/wire routing. Thick back panel holds screws well for mounting components. Plastic construction is non conductive for increased electrical safety. There is room for back lighting with LED strip at top inside of box. Fits behind wall panels.
Please contact Hein at 541 49O 5O98 if you have questions.
We are honored to help you with your van build.
Insulate RV vent cover attached with magnets. Ripstop nylon facing with insulated core. Sewn in magnets keep cover firmly attached to interior bezel of the vent. Magnets and superglue included.
This fits the 14 x 14" Maxxair Fans.
MAGNET WARNING
Neodymium magnets are strong and can pinch skin. They may interfere with medical devices.
DO NOT LET CHILDREN PLAY WITH MAGNETS.
The magnets are brittle and can break or chip easily. Sliding magnets off the stack works best.
Broken magnets can still be used but we also include 2 extra magnets.
Keep magnets away from ferrous metals or they will jump to it.
Installation instructions:
1. Remove vent bezel by removing 4 screws holding it to ceiling.
2. Place vent cover on flat work surface making sure side labeled UP is visible and sewn on tab will be facing forward when back in vehicle.
This is very Important due to magnet polarity.
3. Place and align vent bezel on top of cover.
4. Distribute 12 magnets on back of bezel flange. The 4 round magnets are placed in the middle 2 spots on each side. They will snap to the locations of the magnets in the cover. See listing photo for location of magnets.
5. Make sure the cover stays aligned with the bezel.
6. Pick up each magnet and place a drop of glue on the bezel.
Then let magnet find it's place again. Do this for each of the 12 magnets.
7. Let glue set completely. Takes a few minutes.
8. Re-attach bezel to ceiling with screws removed in step 1.
9. Cover will now snap onto it and be held by magnets.
10. Front panel with tab can be folded over to allow partial 1/3 opening.
Please call Hein for assistance. 541-49O-5O98
-
Dual input: MPPT Solar input or Alternator/Battery input.
- Multi-stage charging ensures batteries are charged to battery manufacturer's recommendations.
- Microprocessor controlled charging algorithm (Bulk, Absorption, Float) for Gel, Flooded, AGM and Lithium batteries.
- Solar Input to trickle charge Alternator Input battery.
-
MPPT solar regulator provides maximum power from solar panels to battery.
Length: 14.0”, Width: 8.1“, Height: 3.8” (356mm x 205mm x 97mm)
Weight: 7.1 lbs. / 3.23 Kg
True Sine Wave output to run motor loads and sensitive electronics
Multi-stage charger will charge your deep cycle batteries quickly and efficiently
Integrated transfer switch allows you to switch seamlessly from shore power to battery power
Ideal inverter for running microwave ovens, kitchen appliances, and consumer electronics
True Sine Wave output to run motor loads and sensitive electronics
Multi-stage charger will charge your deep cycle batteries quickly and efficiently
Integrated transfer switch allows you to switch seamlessly from shore power to battery power
Ideal inverter for running microwave ovens, kitchen appliances, and consumer electronics